Nanda Gypsum

Gyproc Pro-Fill Jointing Compound is a premium construction material used for finishing and smoothing drywall joints, seams, and imperfections. This high-quality compound is specially formulated for professional drywall installation and repair. It is easy to apply, offering excellent workability, and it dries quickly, allowing for efficient project completion. Gyproc Pro-Fill Jointing Compound is known for its exceptional adhesion and crack resistance, ensuring long-lasting, smooth surfaces. It is an essential component in achieving a polished and seamless appearance in drywall installations, making it a preferred choice for contractors and builders seeking top-quality results in the construction and renovation industry.

Gyproc Pro-Top® is a Polymer-based ready-to-work air-drying product designed for all stages of jointing & Finishing and conforms to ASTM C476/C475M:2007.

Benefits:

• Ready-To-Work Product – Water Not Needed
• Air Drying
• Saves Time
• Excellent Workability
• Smooth High-Quality Finish
• Zero/ Minimum Wastage And Reuse Of Bucket

Application:
Gyproc Pro-Top Ready-Mix is an Air-Drying ready to use jointing compound for plasterboard finishing at vertical & horizontal joints. It is also used for filling the uneven gaps, small cut-outs and finishing of the internal and external corner joints.

Process:
First Coat:

• Using an applicator / Trowel, fill the recess formed by the edges of the sheets with Gyproc Pro-Top®.
• Centre the paper tape along the joint and using a Taping knife / Trowel press the tape down into the Gyproc Pro-Top® ensuring no air bubble remain behind the tape.
• Immediately apply a thin coat of Gyproc Pro-Top® over the surface of the tape (100-150 mm wide).
• Allow it to dry

Second Coat:

• Apply a second coat of Gyproc Pro-Top® with an Applicator / Trowel.
• Ensure that this coat extends outside the area of the first coat (200-250 mm wide).
• Allow to thoroughly dry and scrape back any build-up of compound along the joint.

Third Coat:

• Apply a finishing coat of Gyproc Pro-Top® with an Applicator / Trowel.
• Joint edges should be feathered at least 50 mm beyond the edges of the previous coat.
• Allow to dry. Lightly sand in the same direction as the joint using finer sandpaper.

Available Packaging: 20 Kg & 5 Kg pail

Gyproc Easi Fill 90 Jointing Compound is a high-quality, quick-drying gypsum-based product used in the construction and finishing of walls and ceilings. This versatile jointing compound is designed for filling and smoothing joints and imperfections in plasterboard and drywall surfaces. It is known for its exceptional ease of use, as it can be mixed to the desired consistency and applied smoothly with minimal effort. Easi Fill 90 dries rapidly, typically within 90 minutes, allowing for efficient work and faster project completion. It delivers a smooth, seamless finish, making it a popular choice among professionals and DIY enthusiasts for achieving flawless wall and ceiling surfaces.